Chromatography Tubing
IDEX Health & Science Upchurch PTFE TUBING .030X.062X100'
Idex FEP Chromatography Tubing: 100 ft., Natural, Diameter Inner: 0.03 in., Diameter Outer: 0.06 in., 0.15 cm, FEP/PTFE, Autoclavable: Autoclavable, Overall Length: 100 ft., 30.4 m, FEP Tubing, Certifications/Compliance: ROHS
Accuflow Systems Saint-Gobain Silicone Tubing, Platinum-Cured, 0.188 in ID, 0.375 in OD
Platinum-cured silicone tubing designed for sanitary fluid transfer and bioprocess applications. It features a smooth bore and flexible wall, balancing low extractables with resistance to repeated sterilization cycles. Supplied in 100 ft coils, the tubing is suitable for laboratory and process lines requiring biocompatible, autoclavable tubing.
- Platinum-cured silicone material.
- 0.188 in inner diameter, 0.375 in outer diameter, 0.093 in wall thickness.
- 50 Shore A hardness for flexibility and dimensional stability.
- Supplied in 100 ft coils for extended runs.
- Autoclavable and gamma stable for repeated sterilization.
- Meets USP Class VI and European Pharmacopoeia 3.1.9 standards.
- Wide temperature range, -62°C to 260°C (-80°F to 500°F).
- Smooth bore minimizes particulate trapping and flow disruption.
Trajan Scientific Tubing Fused Silica FST Medical 1/EA
285 m OD x 25 m ID x 10 m length fused silica tubing
IDEX Health & Science Upchurch SS CONNECT SYS 125UM X 70MM
MarvelX™ Stainless Steel 125µm ID x 70mm Length - Full Kit
Waters Corp Tubing Assembly, Tee to Transducer, 1500 Series Pumps
Waters Tubing Assembly, Tee to Transducer, 1500 Series Pumps
Waters Corporation Tubing Assembly, Capillary, With Frit, 40 μm, 16 in.
This capillary tubing with frit is designed for use with the 10,000psi nanoACQUITY system. It connects from the nano tee to the trap valve tube, supporting various system configurations for optimized performance.
- Designed for 10,000psi nanoACQUITY systems.
- Connects nano tee to the trap valve tube.
- Supports direct injection configurations.
- Supports 2D with dilution configurations.
- Supports single pump trapping configurations.
- Supports vented dual pump trapping configurations.
- Includes integrated frit.
Waters Corporation Tubing Assembly, Fused Silica, Inject Valve to Trap Valve, nanoACQUITY UPLC
This tubing assembly is designed for use with the nanoACQUITY UPLC system in 2D analysis setups. It facilitates the connection between the injection valve and the trap valve, serving as an essential component within the online 2D-LC/MS Kit tubing assemblies.
- Configures the nanoACQUITY UPLC system for 2D analysis.
- Connects the injection valve to the trap valve.
- Features fused silica tubing construction.
- Equipped with a V-detail fitting at one end.
- Assembled with a green PTFE sleeve and black plastic fitting into a SCX column.
- V-detail end connects to port 4 of the HTM valve.
Advanced Materials Technology MARVELXACT PLS 100 X 350MM
Advanced Materials Technology’s MarvelXACT finger-tight UHPLC connectors with volume definitions easily identifies dispersion volume contribution. Haptic “click” indicates optimum torque and zero dead volume connection. Connector and tubing for both pre and post column installation
Waters Corp Waters Tubing, FEP, 6.0 mm OD, 4.0 mm ID, 1 m
Waters Tubing, FEP, 6.0 mm OD, 4.0 mm ID, 1 m
